EN Contact Us
The Israeli real estate and commercial construction sector operates under one of the most demanding environmental and regulatory intersection points in the Middle East. From the dense, saline-laden coastal atmosphere of Tel Aviv, Haifa, and Ashdod to the intense thermal fluctuations and sandstorm risks of the Negev and Eilat, combined with the stringent thermal and structural demands of Jerusalem's high-altitude stone cladding projects, selecting the right window frame factory is a critical engineering decision.
As a master-scale extrusion manufacturer with over five decades of metallurgical experience, our production infrastructure is specifically optimized to meet the architectural expectations of Israeli developers, structural engineers, facade contractors, and aluminum fabricators. We supply precision-extruded aluminum window frames, thermal break window profile systems, curtain wall extrusions, and marine-grade aluminum sheets that comply with Israeli Standard IS 1068 (Aluminum Alloys Extruded Profiles for Windows and Doors) and support IS 5281 (Green Building Standard) compliance.
To deliver true competitive advantage and high information gain to Israeli B2B buyers, window framing systems must be engineered around three distinct geographical micro-climates:
Our in-house die sinking tooling facility translates your DXF, DWG, or STEP drawings into custom extrusion dies within 10 to 15 working days. From slimline sliding window tracks to heavy-duty unitized curtain wall mullions, we guarantee ±0.15mm cross-sectional precision.
In-house vertical powder coating and automatic anodizing lines ensure full film-thickness control (60-80 microns for powder coat; 15-25 microns for anodizing). Tested against 2000-hour acetic acid salt spray (AASS) for maximum coastal durability.
Featuring mechanical insertion of high-grade glass-fiber reinforced polyamide strips (PA66 GF25), our thermal break window frames prevent thermal bridging, preventing interior condensation and supporting IS 5281 Green Building energy credits.
Extrusion quality is directly dictated by raw billet purity, precise homogenizing, and controlled artificial aging cycles. Unlike factories using secondary scrap metal, our window frame profiles are extruded exclusively from primary A00 electrolytic aluminum billets (99.7% purity). Below is the comprehensive technical breakdown of the aluminum alloys and tempers engineered at our manufacturing facility for window and building facade applications:
| Alloy & Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Hardness (HB) | Primary Israeli Application Scenario |
|---|---|---|---|---|
| 6063-T5 / T6 | ≥ 215 / ≥ 245 | ≥ 170 / ≥ 210 | 85 - 95 | Standard & High-End Architectural Sliding Windows, Casement Windows, Interior Partition Frames. Excellent surface finish for powder coating. |
| 6061-T6 | ≥ 290 | ≥ 240 | 95 - 100 | Heavy Structural Window Frames, Commercial Storefronts, Unitized Curtain Wall Load-Bearing Mullions, Wind Bracing. |
| 5083-H116 / H321 | ≥ 305 | ≥ 215 | 90 - 95 | Coastal Cladding Sheets, Marine-Grade Exterior Sill Flashing, Severe Salt-Spray Environments (Tel Aviv & Haifa Shorelines). |
| 5754-H22 / H111 | ≥ 220 | ≥ 130 | 65 - 75 | Formable Architectural Panels, Deep-Drawn Window Sub-Assembly Profiles, Decorative Exterior Façade Elements. |
| 5052-H32 | ≥ 230 | ≥ 160 | 60 - 70 | Anodized Cladding Plates, Window Infill Panels, Shading Louver Blades, Rain-screen Vent Channels. |
To match Israeli architectural trends—which heavily favor sleek matte blacks, metallic silvers, warm anodized bronzes, and textured dark grays (RAL 7016 Anthracite Gray, RAL 9005 Jet Black)—our coating lines provide superior uniformity and weatherability:
The Israeli construction industry is experiencing rapid modernization. Urban renewal programs (Pinui Binui and NAMA 38), combined with large-scale commercial development along the coastal highway corridor, have elevated technical specifications for imported window systems. Key trends shaping procurement include:
Modern Israeli architecture prioritizes floor-to-ceiling glass expanses with minimalist visible aluminum sightlines. Fabricators are moving away from traditional thick non-thermal frames toward ultra-slim thermal break sliding door and window systems that maximize daylight penetration while maintaining strict thermal insulation values under SI 5282 regulations.
With high urban density in cities like Tel Aviv and Ramat Gan, acoustic damping is a prime selling factor for residential apartments. Our window frame sections are designed with multi-chamber internal geometry and double-EPDM gasket sealing grooves that comfortably accommodate insulated acoustic glass units (up to 32mm–44mm double or triple glazing), reducing urban noise penetration by up to 42 dB.
Aluminum is inherently non-combustible (A1 fire rating). As Israeli municipalities strictly enforce green building standards (IS 5281), our fully recyclable aluminum profiles, combined with energy-saving thermal barrier technology, help project developers earn maximum rating points for sustainable material selection and thermal envelope performance.
For international buyers, selecting a manufacturing partner requires certainty in capability, capacity, and compliance. Building on over 53 years of metallurgical mastery originating from our parent group, our extrusion mill offers a vertically integrated, single-site manufacturing process that eliminates third-party delays and quality discrepancies.
We do not outsource die production. Our master die technicians design, machine, and polish custom extrusion tooling in-house, enabling rapid prototyping, sample delivery in 10-15 days, and absolute control over wall thickness and tolerances.
Equipped with multiple automated extrusion presses ranging from 600 tons to 3,000 tons press capacity. We process small precision window beads as easily as large-scale 300mm circumscribing circle curtain wall mullions.
Every production batch undergoes strict laboratory verification: optical emission spectrometer testing for alloy chemical composition, Webster/Brinell hardness testing, cross-hatch coating adhesion checks, and digital dimensional profile projection.
Exporting fragile, high-finish architectural profiles to Israel requires specialized maritime packaging to prevent transport scratches, transit bending, or moisture staining:
Yes. Our extrusion alloys (primarily 6063-T5/T6 and 6061-T6) and wall thickness parameters meet or exceed the requirements of IS 1068. We provide complete chemical composition and mechanical property mill test certificates (MTC) with every export batch.
Absolutly. Send us your CAD drawings (DXF, DWG, STEP) or a physical profile sample. Our engineering team will review extrudability, calculate circumscribing circle dynamics, and fabricate custom dies within 10 to 15 working days followed by sample approval.
Our standard MOQ is typically 500 kg to 1,000 kg per profile section per finish color. For large-scale residential tower or commercial building contracts, we offer flexible batch scheduling aligned with your fabrication timeline.
Our thermal break profiles utilize mechanically crimped PA66 GF25 (25% glass-fiber reinforced polyamide) thermal struts. This creates an effective thermal barrier that prevents heat conduction through the frame, maintaining interior cooling efficiency and meeting IS 5281 green building criteria.
For coastal environments within 5 km of the sea, we recommend our Qualicoat Class 2 architectural powder coating over chromate-free zirconium pre-treatment, or a 25-micron heavy anodized finish. Both offer outstanding resistance to marine salt spray, oxidation, and pitting.
Production lead time is generally 15 to 20 days post-sample approval. Maritime transit time from our export port to Ashdod or Haifa typically ranges from 18 to 25 days depending on the shipping line, giving an end-to-end delivery cycle of approximately 5 to 6 weeks.
Get in touch with our technical sales team today for die feasibility reviews, CAD profile evaluations, metallurgical advice, or competitive CIF Haifa / Ashdod price quotations.
Contact Us