EN Contact Us
Explore our export-ready architectural and structural aluminum extrusions, plates, and cut-to-size angle profiles manufactured under AS9100 and ISO 9001 certified quality controls.
New Zealand’s built environment presents demanding engineering constraints: intense coastal atmospheric corrosion, severe seismic drift demands, and strict regulatory standards under the New Zealand Building Code (NZBC).
For structural fabricators, facade engineers, and marine yards operating in Auckland, Christchurch, Wellington, and Tauranga, sourcing structural aluminum profiles requires verified adherence to AS/NZS 1866:1997 (Extruded aluminium alloy profiles) and AS/NZS 1664.1:1997 (Structural aluminium design). Unlike generic commercial angles, structural L-sections must deliver exact yield strengths, controlled wall tolerances, and grain-structure stability after artificial ageing.
Our direct mill extrusion plant manufactures equal and unequal structural angles from primary virgin A00 aluminum ingots. By strictly controlling copper and iron impurities during billet melting, our profiles achieve superior ductility and fracture toughness—critical properties for dissipating seismic energy in building frames designed under NZS 1170.5.
As an established B2B manufacturer rooted in three generations of industrial metals expertise (operating since 1972), we maintain an end-to-end production ecosystem under one roof:
| Alloy & Temper | Yield Strength (MPa) | Tensile Strength (MPa) | Corrosion Resistance (AS/NZS 2312) | Weldability (GTAW/GMAW) | Target New Zealand Application |
|---|---|---|---|---|---|
| 6061-T6 | ≥ 240 MPa | ≥ 290 MPa | High (Zone C1–C4) | Excellent | Structural sub-framing, solar mounting rails, seismic bracing. |
| 6082-T6 | ≥ 260 MPa | ≥ 310 MPa | High (Zone C1–C4) | Excellent | Heavy civil infrastructure, bridge walkways, high-load brackets. |
| 6063-T6 | ≥ 170 MPa | ≥ 215 MPa | Very High (Zone C1–C4) | Excellent | Architectural curtain wall trims, window framing, glazed louvers. |
| 5083-H116 | ≥ 215 MPa | ≥ 305 MPa | Exceptional (Zone C5 Marine) | Outstanding | Shipbuilding hulls, commercial catamarans, marine aquaculture. |
| 5052-H32 | ≥ 190 MPa | ≥ 230 MPa | Exceptional (Zone C5 Marine) | Outstanding | Sheet metal angles, enclosure frames, transport equipment. |
From high-wind commercial curtain walls in Auckland to marine fabrication in Tauranga and earthquake-resilient structures in Canterbury, our aluminum angles are engineered for local performance.
Auckland’s urban boom and Wellington’s severe wind zone mandates (NZS 3604) require lightweight, rigid facade sub-structures. Our OEM 6061-T6 unequal structural angles act as primary anchor clips and horizontal transoms, engineered to handle dynamic wind pressure and differential thermal expansion without creaking or structural fatigue.
Following Canterbury’s structural building code updates, modular timber and steel construction firms across Christchurch utilize high-ductility 6082-T6 equal angles for seismic wall-to-floor tie connectors. These angles offer precise deformation tolerance, absorbing inter-story drift during seismic events while remaining easy to install off-site.
In New Zealand’s premier marine hubs, corrosion failure is non-negotiable. We supply certified 5083-H116 structural L-beams and stiffeners directly to shipyards constructing aluminum catamarans, workboats, and aquaculture infrastructure. These profiles withstand continuous submersion in sea water without pitting.
For utility-scale solar farms and vineyard automation equipment in regional New Zealand, our 6061-T6 anodized structural angles provide chemical resistance against agricultural sprays and fertilizer fumes while delivering high torsional rigidity against rural wind loads.
New Zealand road transport builders require high strength-to-weight ratios to maximize payload capacities under NZTA axle weight limits. Custom 6061-T6 extrusions are utilized for side coamings, chassis runners, and structural corner posts.
High-end commercial developments in Wellington and Auckland utilize 25-micron black and gold anodized equal angle trims for shadow line detailing, acoustic panel edging, and heavy-duty shopfitting frameworks.
1. Embodied Carbon & Homestar Rating Acceleration: With the New Zealand Green Building Council (NZGBC) pushing for decarbonization through Homestar v5 and Green Star NZ ratings, architects are replacing energy-intensive structural steel with 100% recyclable structural aluminum. Our factory utilizes high-purity billets and internal scrap recycling loops to lower carbon footprints per ton.
2. Prefabrication & Off-Site Manufacturing (OSM): Rising on-site labor costs in New Zealand have accelerated the adoption of factory-assembled modular panels. OEM structural angles supplied pre-drilled, notched, and anodized cut-to-length allow NZ fabricators to speed up assembly times by up to 40%.
3. Severe Coastal Weathering Compliance (NZBC Clause B2 Durability): Under NZBC Clause B2, structural elements must guarantee a minimum 50-year durability lifecycle. Our architectural powder coating processes are strictly color-matched to Dulux Duratec and Interpon powder systems to pass accelerated 3,000-hour salt spray testing (ASTM B117).
Combining 50+ years of metallurgical lineage with modern CNC engineering, we eliminate the supply chain risks associated with importing custom structural extrusions.
Send us your DXF, STEP, or physical profile sample. Our toolmakers evaluate wall thickness uniformities, thermal shrink factors, and press tonnage requirements to deliver approved first-article samples within 10–15 days.
Beyond raw extrusions, our facility features automated CNC milling centers for precision drilling, tapping, countersinking, and notching—delivering ready-to-install structural angle brackets directly to your site.
Every extrusion batch undergoes rigorous SPECTRO chemical analysis, Webster hardness testing, tensile pull tests, and coating adhesion cross-hatch checks. Full EN 10204 3.1 Material Test Certificates (MTC) accompany every shipment.
"In structural aluminum extrusion, quality is not a marketing claim—it is a repeatable engineering protocol. Every profile shipped to New Zealand carries the exact alloy composition, temper hardness, and dimensional accuracy specified in the drawing. We do not compromise on wall thickness to save weight; we build for decades of performance."
— Manufacturing Division Technical Director
Technical and logistical answers for structural engineers, procurement managers, and steel fabricators across New Zealand.
Streamlined engineering collaboration from drawing review to port delivery.
Submit your DXF/STEP files for extrudability, tolerance, and alloy analysis.
Tooling sink complete in 10-15 days; physical sample dispatched for NZ sign-off.
Automated extrusion, heat treatment ageing, CNC machining, and anodizing.
Bundled, containerized, and shipped direct to Auckland, Tauranga, or Lyttelton.
Talk directly with our structural engineering desk. We provide comprehensive instant quotes, die feasibility evaluations, and alloy recommendations within 24 hours.
Inquire Now