EN Contact Us
Custom sheared, CNC milled, and surface-treated aluminum alloy sheets optimized for Philippine B2B contractors, marine shipyards, and industrial manufacturing plants.
A comprehensive technical evaluation of alloy selection, temper optimization, and corrosion mitigation for severe tropical marine and industrial environments across Luzon, Visayas, and Mindanao.
The Philippine archipelago presents one of the world's most aggressive atmospheric testing grounds for metals due to high ambient temperatures, humidity exceeding 85%, and elevated airborne chloride levels along extensive coastlines. Procurement managers in Subic Bay, Batangas, and Cebu shipyards require strict metallurgical verification.
Our Alloy 5083 H116 / H321 plates feature elevated Magnesium content (4.0% - 4.9%), specifically continuous-cast and strain-hardened to prevent intergranular exfoliation corrosion. In comparison, Alloy 5052 H32 provides superior bendability and anodizing responsiveness for architectural cladding in Metro Manila, serving as a cost-effective workhorse for non-structural marine enclosures.
For heavy machinery, renewable solar EPC mounting arrays, and structural busbars across power grids in Visayas, standard non-heat-treatable alloys often lack the required tensile strength. Our continuous heat-treatment quench lines process 6061-T6 and 7075-T6 plates to exacting ASTM B209 standards.
The T6 temper state imparts yield strength exceeding 240 MPa for 6061 and up to 500 MPa for aerospace-grade 7075. These sheets are ideal for AS9100 precision CNC milling, gear components, and heavy-duty structural gussets that endure extreme dynamic loads and typhoon-force wind shears.
| Alloy Grade | Temper Options | Tensile Strength (MPa) | Corrosion Resistance | Primary Philippine Industry Application |
|---|---|---|---|---|
| 5083 Marine Plate | H116 / H321 / H112 | 270 - 345 | Outstanding (Salt Spray >1500h) | Shipbuilding, Fast Ferries, Hull Plating (Cebu, Subic) |
| 5052 Alloy Sheet | H32 / H38 / O | 210 - 260 | Excellent Coastal Durability | Architectural Facades, Fuel Tanks, Bus Bodies |
| 6061 Structural Plate | T6 / T651 / T4 | 290 - 310 | High (When Anodized) | Solar Racking, Bridges, Heavy Machinery Baseplates |
| 3003 Utility Sheet | H14 / H24 / H18 | 140 - 180 | Good Atmospheric Resistance | Cold Storage Insulation, Roofing, HVAC Ducting |
| 7075 High-Strength | T6 / T651 | 530 - 570 | Moderate (Requires Coating) | Aerospace Tooling, Precision CNC Machined Components |
From Luzon’s mega-infrastructure projects to Visayas shipbuilding hubs and Mindanao agricultural processing plants, discover how our custom OEM/ODM aluminum sheets drive local performance.
Deployment: Metro Manila (BGC, Makati, Ortigas), Cebu Business Park.
High-rise commercial towers face intense solar radiation and seasonal monsoons. Our Color Anodized (15µm–25µm film thickness) and PVDF fluorocarbon-coated 5052 / 3003 aluminum sheets withstand severe UV degradation without chalking or fading. Deep-draw capabilities allow custom cassette bending for modern parametric facade designs.
Deployment: Subic Bay Freeport, Batangas Seaport, Balamban Shipbuilding Corridor (Cebu).
As the Philippines solidifies its position as a global shipbuilding destination, demand for DNV/LR certified 5083 H116 marine aluminum plates (4x8, 5x10, 6x20 ft sizes) has surged. Used extensively for workboat hulls, catamarans, and deckhouses, our aluminum reduces vessel displacement while delivering complete seawater corrosion protection.
Deployment: Solar Farms in Tarlac, Pampanga, Negros Occidental, and General Santos.
Under the Philippine Renewable Energy Roadmap, solar installations require lightweight, corrosion-proof structural framing. Our custom-cut 6061-T6 aluminum plates and 5754 mounting accessories offer 30+ year structural lifespans under tropical humidity, replacing heavy galvanized steel and drastically reducing roof dead loads.
The Philippine government’s multi-billion dollar infrastructure push is transitioning toward sustainable, low-maintenance materials. Traditional steel framing in coastal regions suffers from rapid oxidation, leading to inflated maintenance budgets. Direct-factory imported OEM aluminum sheets provide a light-weight, corrosion-immune alternative for airport terminals, railway station canopies, and highway sound barriers.
Public Utility Vehicle (PUV) modernization across Metro Manila and Davao demands weight reduction to maximize battery range in local Electric Jeepneys (e-PUVs). OEM 5052 and 6061 aluminum sheet metal allows body fabricators to shave up to 40% of body weight compared to traditional steel sheet fabrications, directly enhancing battery efficiency.
Mindanao's fruit export industry and nationwide cold chain logistics hubs require hygienic, food-grade aluminum lining sheets. Our 3003 and 5052 embossed/tread aluminum plates comply with strict sanitary standards, serving as seamless inner linings for reefer trucks, walk-in freezers, and banana processing plants.
Philippine contractors traditionally bought aluminum sheets through stockists with high markups. By establishing direct OEM/ODM factory sourcing partnerships, Philippine B2B buyers access factory-gate pricing per kilogram, custom mill-cut dimensions (eliminating scrap waste), and direct shipment to Manila (MICP) or Cebu ports.
Combining over five decades of metallurgical expertise with rigorous AS9100 aircraft-grade quality management systems.
Every cast heat batch undergoes optical emission spectrometry (OES) to verify strict chemical composition boundaries for Mg, Si, Fe, Cu, and Zn before rolling, ensuring zero alloy contamination.
Our 5-axis CNC machining centers enable high-speed milling, drilling, counter-sinking, and chamfering on plates up to 300mm thickness with tight tolerances within ±0.02mm.
Sheets are layered with anti-friction protective interleave paper or PE film, desiccants, heavy-duty waterproof plastic wrapping, and fully wooden-crated for damp-proof ocean transit.
Direct technical answers regarding shipping, custom clearances, alloy certifications, and OEM manufacturing workflows.
We maintain regular direct container vessel shipping schedules to major Philippine seaports: Manila International Container Terminal (MICP / South Harbor), Cebu Port Authority, Batangas Port, Subic Bay, and Davao (Sasa Port). Ocean transit typically takes 7 to 12 days from factory dispatch, with standard production lead times of 10–15 days for mill finish sheets and 15–20 days for custom anodized or CNC machined orders.
Yes. Every shipment is dispatched with an authentic Mill Test Certificate conforming to EN 10204 3.1 detailing chemical composition, tensile yield strength, elongation, and hardness tests. Furthermore, we issue Form E / RCEP (Regional Comprehensive Economic Partnership) Certificates, allowing Philippine importers to enjoy zero or drastically reduced import tariffs under ASEAN-China trade agreements.
Our standard Minimum Order Quantity (MOQ) for stock alloys (such as 4x8 ft sheets in 5052, 6061, 3003) is 1,000 kg (1 Metric Ton) per size. For custom OEM dimensions, specialized anodized color matching, or specific gauge thicknesses ranging between 0.1mm and 300mm, the MOQ is typically 2 to 3 Metric Tons per specification batch.
If your application involves direct immersion in seawater or marine atmosphere exposure (ship hulls, dock plates), specify 5083 H116/H321. For architectural cladding, decorative panels, or general sheet metal forming requiring smooth anodizing, select 5052 H32. For load-bearing structural frames, machinery plates, or parts requiring extensive CNC cutting, select 6061-T6.
Yes. Our in-house anodizing facility produces electro-chemically sealed oxide films in Gold, Champagne, Bronze, Black, Blue, Silver, and custom RAL architectural shades. We guarantee color uniformity within ΔE ≤ 1.0 across large batch runs, crucial for high-visibility curtain walls in commercial real estate developments.
Absolutely. Beyond standard 4x8 ft (1220x2440mm) and 5x10 ft (1524x3048mm) dimensions, our heavy rolling mills and precision face-milling cutters produce non-standard intermediate gauges (e.g., 0.5mm to 300mm plate) to match your engineering drawings, reducing material wastage during final fabrication.
Partner directly with a certified primary aluminum manufacturer. Contact our dedicated Philippine export engineering team today for factory-gate pricing, full specification sheets, and free physical alloy samples.