EN Contact Us
Direct OEM factory supply engineered for Danish glazing contractors, facade fabricators, and architectural skylight builders.
High-yield tensile strength alloy designed for heavy snow-load kerbs and coastal atrium perimeter substructures in Jutland and Zealand.
Send an Inquiry
Industrial structural extrusions custom cut (0.1–300mm) for large-span commercial skylight domes and ridge roofs.
Send an Inquiry
Qualanod Class 1 (25µm) anodized caps providing extreme resistance against Baltic sea breeze corrosion and atmospheric sulfur.
Send an Inquiry
Corrosion-proof guttering profiles engineered for internal condensation collection under Danish winter freeze-thaw cycles.
Send an Inquiry
Aerospace-grade 5-axis CNC milled corner cleats and heavy node components for complex polygon and pyramid skylights.
Send an Inquiry
Precision-sheared thick base plates for roof-to-framing structural anchoring, supporting multi-layer triple glazing glass units.
Send an Inquiry
Superdurable polyester powder finishes available in all Scandinavian RAL colors (RAL 9005, 7016, 9010) with 25-year warranty.
Send an Inquiry
High-flexibility anodized aluminum flashing strips designed for seamlessly sealing roof membranes to skylight curbs.
Send an InquiryThe Danish architectural sector is globally recognized for pioneering sustainable design, daylight optimization, and uncompromising envelope thermal efficiency. As Denmark progresses toward its target of reducing greenhouse gas emissions by 70% by 2030, the national building code—Bygningsreglementet 2018 (BR18)—has established stringent performance benchmarks for transparent building envelope elements. Skylights, roof windows, and continuous atrium light strips face exceptionally strict thermal transfer limits ($U_w$ and $U_f$ values), air tightness requirements, and structural load standards.
For Danish architectural specifiers, general contractors (Totalentreprenører), and aluminum facade fabricators in regions such as Greater Copenhagen, Aarhus, Odense, and Aalborg, sourcing custom extruded aluminum skylight framing systems from leading Chinese manufacturers represents a highly cost-effective strategy—provided the extrusions meet European standard EN 1090-1, EN 13830 (curtain walling and glass roofs), and EN 14351-1.
BR18 dictates that transparent roof structures must prevent thermal bridging while maximizing solar heat gain coefficients ($g$-value) and daylight transmittance ($t_v$). Standard non-insulated frames are prohibited. Our high-precision polyamide thermal break aluminum profiles (PA66GF25) achieve frame thermal transmittance ($U_f$) values as low as 0.85 to 1.1 W/m²K, fully supporting triple-glazed argon-filled insulating glass units (IGUs) required across Denmark.
Aluminum skylight framing systems must withstand dynamic environmental stresses: severe snow loads (DS/EN 1991-1-3), intense wind pressures along the North Sea and Baltic coasts (DS/EN 1991-1-4), and internal humidity condensation. Chinese export-focused manufacturers utilize advanced metallurgical formulations and extrusion press technologies to deliver structural integrity matching European mills.
| Alloy & Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Corrosion Resistance | Primary Skylight Framing Application |
|---|---|---|---|---|
| 6063-T6 | ≥ 245 | ≥ 200 | Excellent (C3/C4) | Architectural glazing bars, cap profiles, interior mullions |
| 6061-T6 | ≥ 310 | ≥ 276 | Very Good (C4) | Heavy-span rafters, node joints, structural ridge beams |
| 6082-T6 | ≥ 340 | ≥ 290 | Excellent (C4/C5) | High structural load skylights, long-span atrium framing |
| 5083-H116 | ≥ 305 | ≥ 215 | Superior Marine (C5-M) | Coastal kerbs, perimeter flashing, exposed gutter systems |
To eliminate galvanic corrosion and thermal stress fractures, our extrusions feature precise wall thickness management (ranging from 2.0mm to 8.0mm), strict geometric tolerances adhering to EN 12020-2, and integrated EPDM gasket channels designed for dry-glazing systems.
Harbor-front developments in Nordhavn and Sydhavnen face severe atmospheric salt spray (C5-M marine environment). Our custom skylight framing uses Qualanod-certified Class 1 anodized aluminum caps (25µm) combined with 5083 alloy substructures, offering complete protection against salt-induced pitting and oxidation.
High-end residential villas and passive homes in Aarhus and Vejle require continuous ridge skylights with zero cold bridges. Our dual-polyamide thermal break systems (PA66GF25 insulation strips up to 34mm width) prevent internal condensation during cold Danish winters (-10°C ambient outdoor temperature).
Industrial facilities along the West Coast of Jutland experience extreme gale-force wind gusts exceeding 1.8 kPa to 2.5 kPa. We supply heavy-duty 6082-T6 structural aluminum box rafters capable of supporting multi-barrel vault skylights with integrated smoke and heat exhaust ventilation (SHEV) units according to EN 12101-2.
In Denmark, the introduction of mandatory LCA (Life Cycle Assessment) calculations under BR18 requires all new construction over 1,000 m² to prove low carbon emissions (below 12.0 kg CO2-eq/m²/year, lowering further to 7.5 kg by 2027). Consequently, procurement managers scrutinize the embodied carbon of imported building materials.
To align with Danish sustainability goals, our manufacturing facilities utilize a minimum of 60% to 80% post-industrial and post-consumer recycled aluminum scrap melted via renewable hydro-energy sources. This reduces the embodied carbon footprint of our extruded framing profiles from the global average of 16.5 kg CO2/kg Al down to less than 4.2 kg CO2/kg Al, supporting LEED, BREEAM, and Nordic Swan Ecolabel certification.
Modern Danish roof designs increasingly incorporate BIPV (Building-Integrated Photovoltaics) and electrochromic dynamic glass (such as SageGlass). Our extruded framing channels are pre-engineered with internal wiring conduits, micro-connector junction pockets, and hidden cable routing, enabling seamless integration of solar-harvesting skylight systems.
With over 50 years of metallurgical experience dating back to 1972, our manufacturing group operates state-of-the-art aluminum extrusion presses (ranging from 800 to 5,000 tons press capacity), automated vertical and horizontal powder coating lines, anodizing baths, and advanced 5-axis CNC machining centers. We bridge the gap between Chinese factory-direct pricing and European quality standards.
We convert CAD DXF/STEP files into finished production dies in 10 to 15 working days. Custom skylight mullion profiles with complex internal screw slots and gasket grooves are validated via finite element analysis (FEA) prior to extrusion.
Our surface finishing lines are certified under Qualicoat Class 2 (Superdurable Polyester) and Qualanod Class 1. Every batch undergoes rigorous cross-hatch adhesion testing, salt spray testing (ISO 9227 > 3000 hours), and coating thickness verification (60–80 microns for powder coating).
All extrusions are wrapped with protective interleaving film, bundled with moisture-absorbent desiccant, and packaged in sea-freight reinforced timber crates suitable for direct container discharge at Port of Aarhus or Port of Copenhagen (Copenhagen Malmö Port).
Request complete DXF/STEP CAD profile catalogs, thermal performance test reports, or schedule an engineering consultation with our technical team today. Direct factory supply for Danish facade contractors and glazing distributors.