EN Contact Us
Ex-factory direct structural beams certified under EN 755, ASTM B221, and SONCAP standards. Built for high mechanical loads, tropical anti-corrosion, and fast-track civil engineering projects across Nigeria.
Nigeria’s commercial expansion across major economic nodes—including the Lekki Free Zone, Eko Atlantic City, Port Harcourt Oil & Gas Hubs, and Abuja Municipal Infrastructure—demands structural materials that survive intense environmental stressors. Traditional structural carbon steel (A36 / Q235) faces rapid degradation in West Africa due to high atmospheric humidity (averaging 80%-90% year-round) combined with airborne chloride ions along the Gulf of Guinea.
As a leading Chinese aluminum beam manufacturer and direct exporter with over two decades of metallurgical research, our factory supplies specialized 6000-series (6061-T6, 6082-T6, 6063-T5) extruded aluminum I-beams, H-beams, and formwork beams engineered to eliminate rust risk while cutting total structural deadload by up to 65% compared to steel.
Our marine-grade anodized layer (15µm–25µm) prevents coastal pit corrosion, salt-fog staining, and oxidation in humid zones like Lagos Island and Calabar without frequent repainting.
Designed to German Euroform standards, our aluminum formwork H-beams yield up to 300+ pours per panel set. Lightweight profiles reduce crane dependency on fast-paced Lagos building sites.
Extruded from high-tensile 6082-T6 alloy with tensile strength surpassing 310 MPa, our I-beams support gantry cranes, heavy assembly plants, and warehouse logistics rails.
Navigating structural requirements for B2B procurement in Nigeria requires precise metallurgical alignment. Selecting the incorrect alloy temper leads to unnecessary material costs or structural deflection under heavy concrete pouring or overhead equipment movement. Below is our engineering baseline for Nigerian buyers:
| Alloy & Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Primary Nigerian Application | Corrosion Resistance |
|---|---|---|---|---|---|
| 6063-T5 / T6 | ≥ 215 | ≥ 170 | 8 - 12% | Pergola Rafters, Architectural Louvers, Curtain Wall Mullions | Excellent (Marine Grade) |
| 6061-T6 | ≥ 310 | ≥ 276 | 10 - 14% | Structural I-Beams, Bridge Walkways, Truck Bed Frames | Very Good |
| 6082-T6 | ≥ 340 | ≥ 290 | 10% | Overhead Crane Rails, Industrial Gantry Supports, Heavy Rigging | Excellent |
| Aluminum Formwork H-Beam | ≥ 290 | ≥ 250 | 9 - 11% | Civil Building Concrete Formwork, Slab Decking Supports | Superior (Passivated Surface) |
Our direct export channels operate efficiently through Lagos (Apapa & Tincan Ports) and Port Harcourt (Onne Port), delivering precision aluminum profiles engineered for localized construction challenges:
With residential and commercial towers expanding rapidly in Lekki, Ikoyi, and Central Business District Abuja, rapid construction cycles are paramount. Our German-Standard Aluminum H-Beams serve as primary load-bearing members under slab forms. Weighing only 3.8 kg/m compared to 11.2 kg/m for equivalent steel timber beams, workers carry and position profiles manually, cutting floor cycle times from 14 days down to 4 days.
In humid coastal oil terminals and offshore support yards around Onne and Bonny Island, steel structural members corrode aggressively due to salt spray. Our 6082-T6 Extruded Crane Rail I-Beams replace corroded runway beams. The alloy’s passive oxide layer withstands sulfur-heavy industrial atmospheres and salt-water exposure, guaranteeing structural safety for 25+ years without continuous painting maintenance.
Utility-scale solar projects in Kano, Kaduna, and Sokoto rely on heavy-duty aluminum structural beams for ground-mounted tracker systems. Our custom H and C-beam channels support high wind load resistance (up to 160 km/h gusts) while facilitating easy assembly with standard stainless steel hardware without site welding.
High-end retail centers, hotels, and luxury estates require aesthetic durability. Our Coextrusion WPC and Anodized Pergola Rafter Beams combine natural timber aesthetic finishes with an extruded structural aluminum core. They resist UV radiation degradation, termite infestation, and warping under West Africa's harsh solar rays.
Over the past five years, the Nigerian construction sector has experienced a technological shift from timber and carbon steel toward modular aluminum profiles. Key factors driving this industry migration include:
We provide full documentation required by the Standards Organisation of Nigeria (SON), including Product Certificates (PC) and SONCAP Certificates (SC). We coordinate directly with inspection agents such as SGS, Cotecna, or Intertek at our factory prior to container loading to ensure smooth customs release at Apapa or Onne ports.
We extrude custom aluminum H-beams and I-beams up to 15 meters. For standard 40ft HQ container loading, the maximum recommended length is 11.8 meters to fit internal container dimensions safely while allowing protective end-capping and wooden bundling.
Every profile is interleaved with protective PE film or non-woven fabric to prevent friction scratch damage. Bundles are wrapped in shrink-wrapped waterproof plastic, edge-protected with heavy cardboard, and strapped onto fumigated wooden pallets designed for forklift unloading.
Yes. Our in-house die tooling shop converts CAD/DXF/STEP files into precision extrusion dies within 10 to 15 working days. First-article samples are extruded, measured for dimensional tolerance under optical projectors, and sent for buyer sign-off before mass extrusion.
For coastal locations like Lagos or Port Harcourt, we recommend either Anodizing Class 20 (film thickness ≥ 20µm) or PVDF Powder Coating (polyvinylidene fluoride) which offers superior resistance against UV breakdown, salt spray, and acid rain erosion.
Choosing an established extrusion manufacturer eliminates middleman markups, guarantees metallurgical consistency, and speeds up production lead times. Our enterprise advantages include:
Operating over 30 automated extrusion presses ranging from 600 Tons to 10,000 Tons die capacity, capable of extruding high-complexity profiles up to 600mm section width.
Our 15-meter long 5-axis CNC machining centers perform precision drilling, tapping, miter cutting, bending, notch milling, and structural welding directly under one roof.
Every heat batch undergoes optical emission spectrometry for chemical purity, Webster hardness testing, tensile strength testing, and coating cross-hatch adhesion checks.
Get in touch with our senior structural aluminum engineering team today. We provide CAD drawing analysis, alloy recommendations, free sample kits, and CIF Apapa/Port Harcourt freight quotes within 24 hours.