Factory-direct structural aluminum sheets, colored anodized extrusions, marine-grade backing plates, and custom CNC cabinet profiles stocked and shipped directly to the Port of Houston.
Heavy-duty marine alloy DC aluminum plate ideal for humidity-proof cabinet carcasses, under-sink moisture barriers, and outdoor kitchen structures.
Available in thicknesses from 0.1mm to 300mm. High-flatness alloy panels designed for modular cabinet side walls and reinforced drawer bottoms.
Electrochemically sealed anodized metal plates perfect for luxury kitchen cabinet door facings, kick-plates, and high-end commercial millwork.
Superior salt-spray resistance certified for outdoor patios, Texas coastal residential outdoor kitchens, and heavy-use commercial catering facilities.
Custom 6061/7075 aluminum CNC machined corner brackets, hidden hinges, and structural joint fittings manufactured to tight ±0.01mm tolerances.
Stress-relieved, precision-milled aluminum plates designed for heavy load-bearing island bases, industrial worktops, and commercial kitchen frames.
Scratch-resistant anodized aluminum profiles engineered for kitchen cabinet trim, frameless door edging, and accent accentuation.
Flexible aluminum skin foils for surface lamination on cabinet doors, providing zero-VOC, fireproof, and metallic aesthetic finishes.
How environmental factors, commercial construction standards, and architectural preferences are driving Houston developers and millwork fabricators toward extruded aluminum profile systems.
The Greater Houston metropolitan area—spanning Harris County, Fort Bend, and Montgomery Counties—presents a harsh environmental mix of high relative humidity (averaging 75% to 90% RH year-round), extreme summer heat, and coastal atmospheric salt exposure from the Gulf of Mexico. Traditional wood-based cabinet materials such as Medium-Density Fiberboard (MDF) and particleboard suffer from severe hygrothermal degradation in these conditions.
When exposed to ambient moisture spikes, wood fibers experience irreversible volumetric swelling, edge-delamination, adhesive degradation, and mold proliferation. Furthermore, Houston’s climate creates an ideal habitat for subterranean termites. Engineered 6063-T5 extruded aluminum kitchen cabinet profiles offer a completely non-hygroscopic alternative: 100% moisture-proof, zero structural warping, insect-immune, and structurally sound for decades.
From luxury high-rises in River Oaks and Downtown Houston to expansive suburban master-planned developments in Katy and The Woodlands, real estate developers and general contractors are shifting toward modular aluminum cabinet solutions. Key drivers include rigorous commercial fire safety mandates (Class A fire rating compliance) and indoor air quality standards (LEED v4 certification requiring zero-VOC off-gassing).
Extruded aluminum profile systems eliminate the formaldehyde-emitting resins inherent in composite wood products. Additionally, for multi-family residential construction, lightweight high-tensile 6063-T6 aluminum profiles cut dead-load weight per floor unit, streamlining structural engineering requirements and expediting on-site assembly via modular mechanical slot-locking hardware.
Tailored extrusion profile geometry engineered specifically for local installation environments and fabricator workflows.
Outdoor entertainment spaces are standard in Houston luxury homes. However, high summer temperatures and coastal atmospheric humidity destroy standard outdoor cabinetry. Our 5052-H32 marine-grade sheet aluminum and 6063-T6 anodized profiles are coated with AAMA 2605-compliant fluoropolymer (PVDF) finishes, resisting 4,000+ hours of salt-spray testing without chalking, blistering, or fading.
Serving the Texas Medical Center ecosystem—the world's largest medical complex—requires cabinetry that tolerates daily chemical disinfection. Our anodized aluminum cabinet door profiles and seamless wall cabinet frames feature non-porous surfaces that resist harsh sterilizing agents (bleach, isopropyl alcohol, quaternary ammonium) while preventing bacterial harbor points.
For high-density apartment developments in Midtown and Montrose, ease of transport and rapid assembly drive profitability. Our knock-down (KD) aluminum profile systems feature standardized corner-key connectors, allowing flat-pack ocean container shipping directly to Houston jobsites, reducing logistics costs by 65% and enabling rapid on-site assembly.
Meeting the aesthetic preferences of top Texas interior designers and architectural firms with mill-to-market precision extrusions.
Contemporary kitchen architecture in Houston emphasizes clean, uninterrupted horizontal lines. Our factory extrudes continuous aluminum G-profile (Gola) and J-profile handleless channels that mount directly to the carcass, allowing flush door integration without surface-mounted hardware.
Glass-front upper display cabinets with hidden internal LED strip lighting channels represent one of the fastest-growing kitchen trends in Texas luxury homes. We manufacture 20mm x 20mm and 21mm x 45mm slim aluminum frame profiles engineered to hold 4mm and 5mm tempered glass panels.
Comparing technical attributes of extruded aluminum profiles against traditional cabinet construction materials used in Texas.
| Performance Characteristic | HAQ Extruded Aluminum (6063-T5) | Plywood (Exterior Grade) | MDF / Particleboard |
|---|---|---|---|
| Moisture Absorption (RH 90% @ 35°C) | 0.00% (Non-Hygroscopic) | 8.00% - 14.00% (Swells) | 15.00% - 25.00% (Delaminates) |
| Tensile Yield Strength | 145 MPa - 210 MPa | 25 MPa - 40 MPa | 10 MPa - 18 MPa |
| Fire Safety Rating (ASTM E84) | Class A (Non-Combustible) | Class C (Combustible) | Class C (Combustible) |
| Formaldehyde Off-Gassing (VOC) | 0.00 ppm (Zero-VOC) | 0.05 - 0.10 ppm (CARB P2) | 0.10 - 0.30 ppm (E1/E2 Grade) |
| Termite & Pest Resistance | 100% Immune | Vulnerable (Requires Chemical Treatment) | Highly Vulnerable |
| Finish Durability (Salt Spray ASTM B117) | 3,000 - 4,000 Hours (PVDF / Anodized) | Fails < 200 Hours | Fails < 100 Hours |
| Recyclability & Circularity | 100% Infinitely Recyclable | Downcycled / Landfill Bound | Non-Recyclable (Landfill Bound) |
Combining 53+ years of metallurgical tradition with modern CNC machining, chromate-free pre-treatment, and international QA standards.
Our dedicated tooling department converts DXF, STEP, or CAD files into finished custom extrusion dies within 10 to 15 working days. Before bulk extrusion, we dispatch first-article samples via express air freight for client fit and finish verification in Houston.
We operate an automated, eco-friendly chromate-free zirconium pre-treatment line followed by electrostatic powder coating. Film thickness (60-80 microns), cross-hatch tape adhesion (ISO 2409), and pencil hardness (2H-3H) are verified on every single production batch.
Located near major ocean freight terminals, we coordinate full container load (FCL) and less-than-container load (LCL) shipments directly to the Port of Houston (Barbours Cut & Bayport Terminals). Materials are packed with interleaved protective film, moisture-proof wrapping, and custom steel-strapped wooden crates.
Everything you need to know regarding aluminum profile grades, custom die sinking, shipping logistics to Texas, and regulatory compliance.
For extruded kitchen cabinet frames, door handles, and edge profiles, we primarily recommend 6063-T5 or 6063-T6 alloy. 6063 provides exceptional surface finish quality, making it ideal for smooth decorative anodizing and powder coating, while delivering high structural rigidity. For heavy load-bearing structural bases or outdoor barbecue cabinet carcasses, we supply 6061-T6 or 5052-H32 sheet for maximum yield strength and salt-air corrosion resistance.
We offer flexible Incoterms including FOB, CIF, and DDP (Delivered Duty Paid) directly to your warehouse in Houston, Katy, Sugar Land, or surrounding industrial zones. Most shipments route via ocean freight directly into the Port of Houston (Barbours Cut or Bayport Container Terminals) with a typical transit time of 24–28 days from dispatch. All shipments include complete customs documentation: Mill Test Certificates (MTR), Commercial Invoices, Packing Lists, and Certificate of Origin.
For standard open-die profiles (G-handles, J-profiles, square tubes, and glass cabinet frames in stock colors), our MOQ starts at 500 kg per profile. For custom OEM/ODM profiles requiring a new extrusion die, the initial trial batch MOQ is 1,000 kg. If your annual purchasing volume reaches specified thresholds, die creation fees are 100% refunded to your account.
Yes. Over 60% of our production consists of custom OEM profiles for international cabinet brands. Simply email us your CAD file (DWG, DXF, or STEP format). Our engineering team will perform a complete extrudability analysis, wall thickness check, and tolerance evaluation within 24 hours. Once approved, custom die creation takes only 10–15 days, followed by sample delivery.
Our architectural anodized profiles undergo an electro-chemical sealing process that creates an aluminum oxide protective layer between 12 and 25 microns thick (qualanod standard). For kitchen cabinet handles and door frames, we offer a specialized micro-sandblasted matte anodized finish treated with an oleophobic anti-fingerprint coating, eliminating smudges and offering superior scratch resistance during daily kitchen use.
Yes. All raw aluminum billets comply with ASTM B221 standards. Surface finishes meet AAMA 2604 / AAMA 2605 specifications for architectural coatings. Furthermore, our extrusions are 100% recyclable, zero-VOC, and contribute directly toward LEED points for commercial developments in Texas.
Connect directly with our senior extrusion engineers today. Get instant technical drawing reviews, custom die sinking estimates, and factory-direct pricing for your next project.
Inquire Now