EN Contact Us
Engineered to rigorous European EN 755, EN 12020, and EN 15088 norms. Direct mill-to-site dispatch available for Milan industrial districts, Segrate logistics hubs, and Brianza manufacturing plants.
For Milanese structural engineers, facade consultants, and procurement managers requiring absolute traceability, mechanical integrity, and compliance under Eurocode 9 (EN 1999) and CE EN 1090-3.
Selecting the precise aluminum extrusion alloy and temper dictates structural load capacity, corrosion resistance in urban Milan atmospheric conditions, thermal conductivity for HVAC heat exchangers, and surface anodizing response.
| Alloy & Temper | Tensile Strength (Rm MPa) | Yield Strength (Rp0.2 MPa) | Thermal Cond. (W/m·K) | Anodizing Rating | Primary Milan Application Field |
|---|---|---|---|---|---|
| EN AW-6063 T6 | 215 – 240 | 170 – 190 | 200 – 220 | Excellent (A1) | Architectural curtain walls, thermal break windows, louver systems |
| EN AW-6061 T6 | 290 – 310 | 240 – 260 | 165 – 180 | Good Decorative | Heavy structural frames, transport engineering, CNC machined bases |
| EN AW-6082 T6 | 310 – 340 | 260 – 280 | 170 – 190 | Good / Technical | High-stress structural beams, cranes, scaffolding, structural trusses |
| EN AW-5083 H116 | 305 – 380 | 215 – 280 | 120 – 140 | Hard Anodize Only | Marine grade structures, chemical storage, heavy equipment beds |
| EN AW-7075 T6 | 540 – 580 | 470 – 500 | 130 – 140 | Not Recommended | Aerospace prototypes, high-stress Monza motorsport tooling, gear parts |
Aluminum extrusions designated for permanent installation in Italian construction works must strictly adhere to European Regulation (EU) No 305/2011 (Construction Products Regulation or CPR). Our production lines operate under certified Factory Production Control (FPC) systems, issuing full Declaration of Performance (DoP) and 3.1 Material Test Certificates according to EN 10204.
For facade contractors in Milan working on projects in Porta Nuova or Mind (Milano Innovation District), we guarantee profile dimensional tolerances conforming to EN 12020-2 (precision extrusions) and EN 755-9 (standard structural profiles).
Lombardy represents Italy's economic power engine. We supply custom aluminum extrusion profile geometries engineered for specific regional industry clusters.
Milan’s skyline requires strict energy performance compliance (nZEB standards) under Italian building energy codes. We extrude complex polyamide-bridged thermal break curtain wall mullions, transoms, and unitized glazing framing in 6063-T6.
Technical Detail: Integrated air-water drainage channels, acoustic dampening cavity chambers, and pre-applied Qualicoat Class 2 powder coating resistant to urban smog and solar degradation.
The manufacturing heartland surrounding Milan demands modular structural T-slot profiles and CNC-milled aluminum machine guards. Extruded from 6061-T6 and 6082-T6 alloys for maximum torsional strength.
Technical Detail: High-straightness tolerances (≤ 0.5mm per meter), uniform anodized layer (15µm) for smooth sliding linear guide integration.
Milan is the global capital of design. We produce ultra-smooth aesthetic aluminum profiles, satin gold anodized aluminum sheets, matte black edge-banding strips, and custom showroom mounting tracks.
Technical Detail: Special die polishing techniques to eliminate extrusion die lines (extrusion streaks), supporting chemical brightening and Qualanod mirror finishes.
Supplying the automotive tier-1 ecosystem around Lombardy with high-ratio aluminum heat sinks and liquid cold plate extrusions designed for EV battery pack cooling and high-power inverters.
Technical Detail: Friction stir welding (FSW) compatible alloy formulations, ultra-dense fin geometries with thermal conductivity exceeding 210 W/m·K.
Supporting solar EPC contractors across Lombardy with extruded aluminum PV module frames, rooftop ballast rails, and ground-mount structural supports treated against atmospheric oxidation.
Technical Detail: Anodized 6005A-T6 and 6063-T6 sections engineered to endure heavy Alpine snow loads and Northern Italian wind vectors.
Leveraging specialized extrusion dies to manufacture dynamic-balanced aluminum loom beam barrels, textile guide rails, and structural tubes requiring perfect concentricity.
Technical Detail: Low run-out tolerances, high yield strength to prevent deflection under high warp yarn tension during weaving operations.
Driven by EU ESG directives, the Italian construction and industrial manufacturing sectors are prioritizing lower embodied carbon materials. Italian architectural practices regularly mandate CAM (Criteri Ambientali Minimi) environmental standards for public and commercial tenders in Milan.
We offer custom aluminum extrusion runs using prime billet blends containing certified post-industrial recycled scrap, reducing carbon intensity per kg of extruded profile while fully preserving 100% mechanical yield under EN 755-2.
In accordance with EU REACH regulations, our in-house vertical powder coating line utilizes advanced zirconium/titanium conversion technology, delivering zero toxic heavy-metal runoff and exceptional adhesion under Qualicoat Class 1 & 2 testing.
From custom die design to final container packing, our single-site production facility removes third-party subcontracting risks, enforcing rigid quality gates on every export batch bound for Italy.
Our master toolmakers convert DXF/STEP drawings into hardened steel extrusion dies within 10 to 15 working days. First-article samples are fully dimensionally audited before bulk extrusion runs begin.
Operating multiple automated hydraulic press capacities capable of handling circumscribing circle profiles up to 350mm. Computer-controlled age-hardening furnaces ensure uniform T5, T6, or T66 tempers across full profile lengths.
Containerized export packaging featuring interleaved anti-scratch film, timber crating, and heavy-duty strapping. Flexible CIF Genoa / La Spezia sea freight dispatch or direct overland truck consignment to Milan customs terminals (DDP / DAP).
Answers to common commercial, technical, and regulatory questions raised by procurement teams across Milan and Lombardy.
Every structural aluminum profile order manufactured for export to Italy is accompanied by a factory-issued EN 10204 Type 3.1 Inspection Certificate detailing chemical spectrographic analysis, mechanical tensile test performance (Rm, Rp0.2, Elongation %), and dimensional tolerance verification under EN 12020-2 / EN 755. Our Factory Production Control (FPC) system satisfies CE marking criteria under the EU Construction Products Regulation (CPR).
Custom die design and matrix trial extrusion takes 10 to 15 working days. Once first-article samples are approved via air courier, full batch extrusion and surface finishing (anodizing or powder coating) requires 2 to 3 weeks. Sea freight transit from plant loading to Italian entry ports (Genoa, La Spezia, or Trieste) typically takes 22 to 28 days, with seamless customs clearance to Segrate or Rho hubs.
Yes. Our in-house anodizing shop specializes in decorative architectural finishes ranging from 10µm to 25µm film thickness. Available shades include brushed champagne, satin gold, dark bronze, deep matte black, and electric blue. All decorative profiles undergo sealing tests under ISO 3210 to ensure zero surface staining.
Standard production runs start at 500 kg to 1,000 kg per section geometry depending on circumscribing size and alloy grade. For initial prototyping or pilot project testing in Lombardy, sample press runs can be accommodated upon tooling approval.
We provide comprehensive commercial invoices, detailed packing lists with bundle heat numbers, Bill of Lading (B/L), Certificate of Origin (Form A / EUR.1 as applicable), and DoP documents. We work with leading Italian freight forwarders to provide seamless CIF, DAP, or DDP delivery directly to your factory or job site.
Submit your CAD drawings (DXF/STEP/DWG) or material specifications today. Our engineering sales team will respond within 24 hours with die feasibility, alloy advice, and competitive mill-direct pricing.