EN Contact Us
Direct mill supply of high-tensile alloy sheets, custom extruded boundary slats, anodized decorative panels, and CNC-machined structural fence posts optimized for rapid assembly across Tashkent, Samarkand, Navoi, and Fergana.
Heavy Security Infill
Custom Cut Slat
Architectural Finish
Marine Security Grade
CNC Post Hardware
Structural Plate
Architectural Slat
Lightweight Screen
Uzbekistan’s continental climate subjects outdoor perimeter structures to extreme thermal shock—spanning winter freezes of -20°C in Nukus to scorching summer highs exceeding +45°C in Tashkent. Standard galvanized iron fencing suffers from rapid micro-cracking, zinc layer spallation, and sub-surface oxidation within 36 months.
Our engineered 6063-T5/T6 extrusions are calculated for dynamic thermal variance ($\Delta T = 65^\circ C$). Integrated expansion slots and elastomeric gaskets absorb mechanical elongation without distorting fence post alignment across multi-kilometer runs.
Coated with super-durable architectural polyester powders (AkzoNobel / Jotun). Certified to withstand 3,000 hours of accelerated weather testing, preventing chalking and color fading caused by intense Central Asian UV radiation.
High-magnesium 5052 and 5083 alloy base plates pass 1,000-hour salt spray (ASTM B117) tests. In-house chromate-free passivation shields fence roots from alkaline groundwater present in Uzbekistan's irrigated agricultural regions.
| Alloy & Temper | Yield Strength (MPa) | Ultimate Tensile (MPa) | Corrosion Resistance | Primary Fencing Application |
|---|---|---|---|---|
| 6063-T5 / T6 | 170 - 210 | 205 - 245 | Excellent (Architectural) | Horizontal privacy slats, louver gates, post channels |
| 6061-T6 | 240 - 276 | 290 - 310 | Superior (Structural) | Heavy structural corner posts, cantilever gate beams |
| 5052-H32 | 193 - 215 | 228 - 260 | Exceptional (Alkaline/Marine) | Laser-cut decorative screen panels, solid sheet infill |
| 5083-H116 | 215 - 240 | 305 - 340 | Maximum Industrial Grade | Substation perimeters, chemical plant security barriers |
Under the Uzbekistan 2030 Strategy, massive infrastructure modernizations demand sustainable, low-maintenance building materials. Our custom aluminum fence profiles address strict regional requirements:
High-end residential compounds and commercial towers require modern architectural privacy fences. We supply high-precision powder-coated aluminum slat systems that seamlessly integrate with automated access gates and modern perimeter smart sensors.
Heavy industrial plants, logistics parks, and chemical processing zones require high-security 6061-T6 palisade and heavy plate anti-climb fencing. Our systems provide zero-maintenance corrosion barrier protection against industrial airborne emissions.
To complement Central Asia's historic Silk Road aesthetic, we supply laser-cut 5052 aluminum sheets featuring custom geometric Islamic fretwork motifs. Anodized in rich warm bronze and gold shades for cultural site enclosures.
Uzbekistan's booming PV solar infrastructure demands light, non-conductive, wind-load certified boundary fencing. Our anodized aluminum mesh fencing withstands sandstorm abrasion without requiring repainting or structural replacement.
Procuring aluminum fencing profiles from our integrated plant ensures optimized freight timelines and direct border clearance into Tashkent.
Goods dispatched via international rail through Khorgos / Alashankou land ports arrive at Tashkent Chukursay (Station Code 720000) within 10 to 14 days, avoiding unpredictable maritime port delays.
All profile batches ship with comprehensive factory inspection documents, alloy chemical spectrographic analysis reports, and physical tensile test certificates compliant with GOST 22233-2018 standards.
Extrusions are protected with non-adhesive PE film interleaving, paper wrapping, corner edge protectors, and steel-strapped wooden pallet boxes built for multi-modal rail-to-truck container transfers.
Essential answers covering material selection, customs documentation, installation support, and commercial payment terms.
Our 6061-T6 structural base plates and heavy-wall (3.0mm–5.0mm) aluminum post profiles feature internal drainage channels to prevent trapped water from freezing and bursting the extrusion. When embedded in concrete footings below the regional frost line (typically 0.8m in Tashkent), structural integrity remains uncompromised.
Standard extrusion MOQ is 500 kg per profile section for stock dies, and 1,000 kg for custom die developments. Tooling creation takes 10–15 working days, followed by bulk extrusion and powder coating in 15 days. Total transit time via China-Central Asia freight train is approximately 12–15 days from factory gate to Chukursay freight station.
Yes. Our automated vertical and horizontal powder coating lines support the complete RAL Classic color palette (e.g., RAL 7016 Anthracite Grey, RAL 9005 Jet Black, RAL 8019 Grey Brown) as well as textured wood-grain sublimation finishes. We utilize Qualicoat Class 2 architectural powders backed by a 15-to-25 year surface guarantee.
Our engineering team performs Finite Element Analysis (FEA) and structural calculation models based on local wind speeds (up to 120 km/h in exposed desert regions like Karakalpakstan). We adjust wall thickness and internal web reinforcement to guarantee compliance with regional building safety standards.
We accept standard international B2B payment terms including Irrevocable Letter of Credit at Sight (L/C at sight) or Telegraphic Transfer (T/T: 30% deposit upon order confirmation and drawing approval, 70% balance against Bill of Lading / Rail Waybill copy). Trade terms offered include FOB, CIF, or CIP Tashkent.