EN Contact Us
Explore our export-standard aluminum sheet inventory, manufactured under strict ISO 9001:2015 and AS9100D quality control parameters with direct mill certificates (EN 10204 3.1).
As a leading Chinese aluminum sheet factory and international exporter, our technical manufacturing infrastructure operates on Direct Chill (DC) Hot-Rolling process technology rather than lower-grade Continuous Casting (CC). For structural, marine, and high-precision CNC machining applications, DC-cast aluminum plates offer unprecedented grain refinement, minimal anisotropy, and near-zero internal porosity.
Modern procurement decisions require complete transparency regarding chemical segregation and mechanical isotropy. When procuring 5083-H116 marine plates, 6061-T6 structural sheets, or 7075-T651 aerospace blocks, the difference between DC hot-rolled stock and CC material dictates whether your final components suffer from stress corrosion cracking (SCC) or micro-delamination during high-speed CNC milling.
| Alloy Series | Primary Alloying Elements | Common Tempers | Yield Strength (MPa) | Key Engineering Applications |
|---|---|---|---|---|
| 1000 Series (1050/1060/1100)创 | 99.0%+ Pure Aluminum | O, H14, H24, H18 | 35 - 145 | Chemical equipment, busbars, heat exchangers, transformers. |
| 3000 Series (3003/3105) | Manganese (Mn) | H14, H24, H18 | 110 - 210 | HVAC ducting, roofing, deep-drawn battery enclosures, cooking utensils. |
| 5000 Series (5052/5083/5754) | Magnesium (Mg) | H32, H111, H116, H321 | 190 - 350 | Shipbuilding, pressure vessels, fuel tanks, armor plating, LNG carriers. |
| 6000 Series (6061/6082) | Magnesium & Silicon (Mg-Si) | T4, T6, T651 | 240 - 320 | Structural framing, automotive chassis, precision CNC machined parts. |
| 7000 Series (7075/7050) | Zinc & Copper (Zn-Cu) | T6, T651, T7351 | 480 - 540 | Aerospace spars, high-stress defense components, injection molding tools. |
Navigating carbon tariffs, supply chain transparency, and digital mill integration is essential for enterprise procurement teams looking to lock in cost advantages while meeting ESG compliance.
With the European Union’s Carbon Border Adjustment Mechanism (CBAM) fully phasing in, global buyers must audit Scope 1 and Scope 2 emissions. Top Chinese exporters are shifting to hydro-powered primary smelters and recycled secondary aluminum scrap integration, cutting embedded carbon footprints below 4.0 tCO2/t Al.
Traditional paper Mill Test Certificates are being replaced by blockchain-anchored QR codes laser-etched onto sheet edges. Every batch of 5083 marine plate or 7075-T651 block provides real-time access to spectral melt heat numbers, ultrasonic flaw graphs (ASTM A609/SEP 1921), and tensile test logs.
To hedge against regional port congestion and geopolitical tariff shifts, tier-1 global manufacturers are establishing strategic Vendor-Managed Inventory (VMI) frameworks with verified Chinese mills. This guarantees 30-day safety stock buffers held in bonded free-trade zones (FTZ).
Discover how advanced thermo-mechanical processing (TMP) and automated surface finishing are opening new frontiers for light-weighting and durability.
Next-generation 1+4 tandem hot-rolling lines enable single-width production up to 3000mm without longitudinal welds. This allows marine architects and tank trailer manufacturers to build seamless vessel hulls and chassis, drastically reducing welding labor and structural fail points.
Environmental compliance mandates zero-hexavalent chromium pretreatments. Advanced electrolytic anodizing lines now utilize fluorotitanic/zirconic passivation, creating dense oxide layers (up to 25 microns) with high UV resistance and scratch hardness for architectural facades and decorative electronics.
High-speed CNC machining of thick aluminum plates often causes severe warpage due to residual internal stress. By applying a controlled 1.5%–3% permanent stretch after solution heat treatment (T651 temper), internal stress vectors are neutralized, permitting distortion-free milling.
Leveraging over 50 years of combined metallurgical engineering heritage, our integrated manufacturing plant bridges raw ingot smelting with high-precision downstream fabrication. We operate a complete internal loop: die design, DC billet casting, heavy plate rolling, tension leveling, automated anodizing/powder coating, and 5-axis CNC pre-machining.
Every cast heat undergoes Optical Emission Spectrometry (OES) analysis to verify chemical limits down to 0.001% composition. Mechanical testing includes room-temperature tensile (ASTM E8), Brinell/Vickers hardness, and intergranular corrosion testing (ASTM G67 for 5000-series marine alloys).
Equipped with high-definition waterjet tables, precision gang slitting machines, and heavy plate saw lines, we supply custom cut-to-size aluminum sheets from 0.1mm foil-thin gauges up to 300mm ultra-thick structural slabs, maintaining length/width tolerances within ±0.2mm.
To eliminate surface oxidation and water staining during multi-week ocean transit, sheets are interleaved with neutral anti-corrosion paper or protective PE film, vacuum-sealed in desiccant-loaded moisture barrier bags, and mounted on fumigated wooden pallets reinforced with steel strapping.
Direct engineering and commercial answers to simplify your global sourcing workflow.
Connect directly with our senior metallurgical engineers and export pricing desk. Receive detailed chemical composition sheets, mechanical test reports, and FOB/CIF pricing within 12 hours.
Get Catalog